Table of Contents


Scope

Lab for graduate students.

  • 65" 4K Display
  • Crestron MPC3-102-B Button panel Control system
  • Crestron AirMedia

Location

Using the System


Turning the system on and off

The AV system will power on when pressing the power button in the lower right corner of the control panel.  This will turn on the display.  To turn the AV system off, press the power button again.

Source Selection

There is one source available for selection, AirMedia.  To select the source, press the corresponding button on the top of the control panel.

Volume Control

Volume can be controlled using the volume buttons at the bottom of the control panel.  The raise and lower buttons are on either side of the volume bar and the mute button is located in the lower left corner.


Using the AirMedia

The AirMedia allows for wireless presentation of any device connected to the UCCS-Wireless network. 

To connect to the AirMedia:

  1. Select the AirMedia source on the touch panel
  2. Open a web browser and enter the address listed on the lower left corner of the display
  3. Follow the instructions on the webpage to download the app to your device
  4. Enter the IP address and code to connect your device and start presenting




Troubleshooting

Audio Issues

All audio in this room is routed through the wall-mounted display. 

  1. Make sure the audio is turned up on the control panel and unmuted.
  2. Make sure the source is playing audio, has its volume turned up, and is unmuted.
  3. Test with a different device and media to determine the cause of the audio issue.

Video Issues

  1. Make sure the display is turned on.
  2. Make sure the desired source is selected and a device is connected to that input.
  3. Test with a different device to determine the cause of the video issue.

Room Specific Issues

This room has no unique equipment or known issues.







  • No labels