...
- Using the provided ethernet cable, connect your RAP to a free and available port on your home router or cable modem
- The ethernet cable should be plugged into the port on the RAP labelled E0. The cable may already be plugged in for you when you receive the RAP.
- Using the provided AC adapter, plug the power cable into a regular wall electrical outlet and then plug the small circular plug into the side of the AP.
- You should see LED lights on the front of the RAP blinking, indicating it is booting up.
- Wait about 5 minutes for the RAP to fully boot. Once booted, it should begin broadcasting the UCCS-Wireless wireless network.
- Test with your computer or phone and make sure you can connect to UCCS-Wireless
Below is a basic diagram showing a simplified view of setting up and connecting your RAP:
Model-specific setup instructions
...