Note Joining the eduroam wireless network requires you to meet either one of the two conditions below... If neither of the above apply to you, please visit the UCCS-Guest information page for information regarding guest wireless access.
.... or ....
Steps:
Step 1: Tap and open Settings
Step 2: Select Wi-Fi and enable Wi-Fi
Step 3: Select the eduroam network
Step 4: Enter your full domain username and password then click Join
Your username must be in the form [email protected]
Step 5: Review security certificate
Note - the following refers to UCCS users who are joining eduroam either on the UCCS campus or at other eduroam institutions. For other eduroam guests on the UCCS campus from other eduroam institutions, you will want to make sure the certificate presented to you is from your home institution.
You should see a screen similar to the following asking you to verify and accept the server's security certificate. The server cppm.uccs.edu is the server you are authenticated against. To be safe you should always validate the certificate you are about to trust. To validate and see more information about the certificate, click More Details
Scroll down until you see the Fingerprint section
Your certificate fingerprints should match the fingerprints listed below... Wireless Authentication Server Certificate Fingerprints (SHA-256 and SHA-1) SHA-256: 6B A9 C8 29 D3 C4 3A E2 ED BE 88 29 9E F9 4C 46 4F 10 5D 12 E0 C0 6F E2 CD 07 6D D7 A8 54 8F DA SHA-1: 36 88 97 DB 04 13 80 CE 84 1E BB 22 20 56 68 BF 92 F4 78 B4 If the fingerprints do not match, DO NOT trust the certificate! Click CANCEL and contact the OIT Service Desk.
Step 6: Accept the security certificate
If your certificate fingerprints match those listed above, you can trust the certificate is valid. Click Trust.
Step 7: Finished - Your device should now be connected to eduroam.
Screenshots from iOS version 12.2
Updated on 2019-05-15