Skip to end of metadata
Go to start of metadata


Note

Joining the eduroam wireless network requires you to meet either one of the two conditions below...

  • You have a UCCS username and password (because you are are a student, faculty or staff)
    .... or ....
  • You have an account through your institution, which is a participating institution with eduroam

If neither of the above apply to you, please visit the UCCS-Guest information page for information regarding guest wireless access.


Step 1: Open Network Settings

Click the network icon in the task bar, typically located in the lower right side of the screen. Then go to network settings by clicking on the gear icon at the top of the card.


Step 2: Select the Eduroam Network

Click on Wi-Fi to show all available networks. Select the eduroam network from the list.


Step 3: Choose Settings and Enter Your Username and Password

Make sure the settings match the ones listed below. Enter your UCCS username and password, then click Connect.

SSID: eduroam

EAP method: PEAP

EAP Phase 2 authentication: MSCHAPv2

Server CA certificate: Default

Identity: Enter your UCCS full domain username in the form username@uccs.edu (it must have "@uccs.edu" on the end)

Password: Your UCCS password

Anonymous Identity: <leave blank>


Step 4: Verify Connection

Check to see if your device is connected by clicking the network icon located in the bottom right of the screen. The device should show that it's connected to eduroam and display the signal strength of the network.

Your device should now be connected to eduroam.

Still having problems? Contact the OIT Help Desk for more help.