Table of Contents
Scope
This is a projector-based, uncontrolled classroom with an Epson projector and remote.
- 2017 iMac Podium PC
- 2 Ceiling Speakers
- Manual Screen
- Epson PowerLite L610U 6000 Lumen Laser Projector with Mount
- Ceiling Audio Amplifier
- Vaddio/Hyflex VTC System with Camera and Microphones
Location: Columbine 1st Floor
Remotes
Projector Remote
Controls the projector and volume in the room.
Hyflex Remote
Controls the Hyflex VTC System.
Lectern
Remote Location
Locations for both remotes are located in the middle drawer on the right side of the lectern shown above.
Keyboard/Mouse Location
Keyboard and mouse are located in the top drawer on the right side of the lectern shown above
Courtesy Shelf
At the top left of the podium, there is a pull out shelf which can be utilized for placing additional materials on the podium similar to the one above.
Controlling the A/V System
Using the Remote
The remote for the projector controls most functions in the room. The remote is labeled below with the colors corresponding to a particular section explaining that function.
Turning the system on and off
To turn the system on, press the power button on the remote (outlined in orange above). This will only turn on the projector. You must physically pull on the string/handle on the screen to lower it.
To turn off the system, press the power button twice. This will turn off the projector. To raise the screen, pull on the string/handle and the screen should raise. You may have to push on it a bit to get it all the way up.
Source Selection
The source should always be HDMI/Video, also called HDBaseT (outlined in blue above). The projector will automatically use the laptop HDMI connection if it is connected. Otherwise, it will use the podium PC as the source.
Volume Control
Volume can be controlled with the volume buttons on the remote (outlined in red above), or on the PC using the volume controls 
on the bottom right corner of the screen.
Projector Control
The most commonly used projector functions are A/V Mute and Freeze. A/V Mute is on the bottom left of the remote, and Freeze is on the bottom right of the remote (both outlined in green above).
- A/V Mute will shutter the projector and mute the audio. Use this feature when you want to use the whiteboard or front of the room without shutting down the system. Please only use this feature for up to 20 minutes, otherwise it's best to shut down the system.
- Freeze will freeze the currently displayed image on the screen. Use this feature if you'd like to hold a frame still on the screen or use the podium PC for another activity without displaying it, such as checking your email.
Inputs
Using the Podium PC and Lectern
The podium PC is on the desk at the front of the room and is the primary source for this AV system and should use the VGA connection. This computer runs the same image as all other podium computers in general fund classrooms and labs. You can sign in using your UCCS credentials.
Using a Laptop
The HDMI cable on the lectern is for use with a laptop. Connect your device, and the system will automatically switch to the correct input.
Screen Control
The screen in this room is manually operated. The handle, with a string attached, is outlined in black in the photo above.
| OIT calibrates the projector image when the bottom weighted bar of the screen is closest to the marker tray. If the screen isn't the same height as the marker tray, the image may be off centered or cut off. |
Troubleshooting
Audio Issues
Fixing Audio Issues: Uncontrolled Room
Video Issues
Fixing Video Issues: Uncontrolled Room
COLU 1st and 2nd Floor DM Transmitter
Vaddio/Hyflex VTC System
Room Specific Issues
COLU 1st and 2nd Floor DM Transmitter
Photos
This is a projector-based, uncontrolled classroom
The room speakers are located on the ceiling rack on either side of the projector.
This is the camera in the room. It is located on the back wall opposite to the podium.
This is the A/V rack located in the bottom right compartment of the podium. It contains the Vaddio Hyflex/VTC system and a Crestron DM-TX-201-C
This is the Cisco phone located on the top of the podium in the left corner.