Table of Contents
Scope
This is a projector-based, uncontrolled classroom with a Epson projector and remote.
- Podium Computer
- Audio system with speakers
- Projection screen
- Full HD Laser Projector
Location: Cragmor Ground Floor
Remotes
Projector Remote
Controls the projector and volume in the room. Located in the middle right podium drawer or commonly on top of the podium.
Controlling the A/V System
Using the Remote
The remote for the projector controls most functions in the room. The remote is labeled below with the colors corresponding to a particular section explaining that function.
Turning the system on and off
To turn the system on, press the power button on the remote (outlined in orange to the left). This will only turn on the projector. You must physically pull on the string/handle on the screen to lower it. The bottom edge of the screen should be about 1-2 inches below the marker tray of the whiteboard.
To turn off the system, press the power button twice. This will turn off the projector. To raise the screen, pull on the string/handle and the screen should raise. You may have to push on it a bit to get it all the way up.
Source Selection
The source should always be HDMI/Video, also called HDBaseT (outlined in blue to the left). The projector will automatically use the laptop HDMI connection if it is connected. Otherwise, it will use the podium PC as the source.
Volume Control
Volume can be controlled with the volume buttons on the remote (outlined in red to the left), or on the PC using the volume controls 
on the bottom right corner of the screen.
Projector Control
The most commonly used projector functions are A/V Mute and Freeze. A/V Mute is on the bottom left of the remote, and Freeze is on the bottom right of the remote (both outlined in green to the left).
- A/V Mute will shutter the projector and mute the audio. Use this feature when you want to use the whiteboard or front of the room without shutting down the system. Please only use this feature for up to 20 minutes, otherwise it's best to shut down the system.
- Freeze will freeze the currently displayed image on the screen. Use this feature if you'd like to hold a frame still on the screen or use the podium PC for another activity without displaying it, such as checking your email.
Inputs
Using the Podium PC and Lectern
The computer placed on the podium is the primary source for this AV system. This computer runs the same image as all other podium computers in general fund classrooms and labs. You can sign in with your UCCS credentials.
The keyboard and mouse should be located in the open drawer shown below. Please return them to this drawer after use.
Using a Laptop
The HDMI cable is used when you want to utilize your laptop to present to the projection system.
Screen Control
There seems to be a slot for a screen for this room, though I don't remember seeing any controls. This will need to be checked.
Troubleshooting
Audio Issues
Fixing Audio Issues: Uncontrolled Room
Video Issues
Fixing Video Issues: Uncontrolled Room
COLU 1st and 2nd Floor DM Transmitter
Room Specific Issues
This room has no unique equipment or known issues.
Photos
This is a projector-based, uncontrolled classroom.
The room speakers are located on the ceiling on either side of the projector.
This is the Cisco phone in the room.
This is the AV transmitter located in the bottom of the podium
This is the projector controls located in the room.