Table of Contents
| Table of Contents | ||
|---|---|---|
|
Scope
This is a computer lab classroom with one screen, one professor PC at the front desk, and 22 student PCs around the room.
- 23 Dell OptiPlex 7470 AIO Series
- 2 Ceiling Speakers
- Tensioned Screen
- Hitachi LP-WU6500 5000 Lumen Laser Projector with Mount
- Ceiling Audio Amplifier
- Vaddio/Hyflex VTC System with Camera and Microphone Array
- Cisco CP-7841 (ext. 4223)
Location: Columbine 2nd Floor
Remotes
Projector Remote
Controls the projector and volume in the room. Located on the front desk.
Hyflex Remote
Controls the Hyflex VTC System. Located on the front desk.
Controlling the A/V System
Using the Remote
The remote for the projector controls most functions in the room. The remote is labeled below with the colors corresponding to a particular section explaining that function.
Turning the system on and off
To turn the system on, press the red "ON" button on the remote (outlined in orange above). This will only turn on the projector. You must physically pull on the string/handle on the screen to lower it.
To turn off the system, press the green "STANDBY" button twice (outlined in orange above). This will turn off the projector. To raise the screen, pull on the string/handle and the screen should raise. You may have to push on it a bit to get it all the way up.
Source Selection
The source should always be HDBaseT (outlined in blue above). The projector will automatically use the laptop HDMI connection if it is connected. Otherwise, it will use the podium PC as the source.
Volume Control
Volume can be controlled on the projector by pressing the volume button, then using the left and right arrows (outlined in red above). It may also be controlled on the PC using the volume controls 
on the bottom right corner of the screen.
Projector Control
The most commonly used projector functions are Blank (A/V Mute) and Freeze. Blank is on the bottom middle of the remote, and Freeze is on the bottom left of the remote (both outlined in green above).
- Blank will shutter the projector and mute the audio. Use this feature when you want to use the whiteboard or front of the room without shutting down the system. Please only use this feature for up to 20 minutes, otherwise it's best to shut down the system.
- Freeze will freeze the currently displayed image on the screen. Use this feature if you'd like to hold a frame still on the screen or use the podium PC for another activity without displaying it, such as checking your email
Inputs
Using the Podium PC and Lectern
The podium PC is on the desk at the front of the room and is the primary source for this AV system. This computer runs the same image as all other podium computers in general fund classrooms and labs. You can sign in using your UCCS credentials.
The keyboard and mouse are sitting right in front of the PC on the desk.
Using a Laptop
This room is only equipped with an HDMI cable for a laptop. You can connect your laptop to this HDMI cord and the HDBaseT source will automatically switch the projector to using your laptop as the input.
Screen Control
The screen in this room is manually operated. The handle, with a string attached, is outlined in black in the photo below.
| Info |
|---|
| OIT calibrates the projector image when the bottom weighted bar of the screen is closest to the marker tray. If the screen isn't the same height as the marker tray, the image may be off centered or cut off. |
Troubleshooting
Audio Issues
Fixing Audio Issues: Uncontrolled Room
Video Issues
Fixing Video Issues: Uncontrolled Room
Vaddio/Hyflex VTC System
Room Specific Issues
Photos
This is the room from the front left.
This is the room from the front right.
The room speakers are located on the ceiling on either side of the projector.
The room speakers are located on the ceiling on either side of the projector.
This is the screen located on the front wall behind the desk.
This is the projector in the room.
On the floor, there's a floor box with network for the phone/computer as well as an input for DM transmission which carries audio/video to the projector.
This is the podium PC that is at the front of the room on the desk and is the main source for the AV system.
This is the camera in the room.
This is the phone, located to the right of podium PC.
This is the wall rack which has the switch for the Vaddio/Hyflex VTC System, located behind the podium PC desk.