Scope

This is an Extron controlled room utilizing a Extron button panel at the podium with the following equipment:

Extron Touch Panel
Laptop HDMI Connection
Crestron Air Media
Epson L630U Projector
Pull down projector screen
36 Lab computers

Location: 2nd floor of KFL

Academic Support Knowledge Base > EPC 239 - Computer Lab > EPC 239 Floor Plan.png

Controlling the A/V System

Using the Extron Touch Panel

Academic Support Knowledge Base > EPC 239 - Computer Lab > image-2026-1-23_8-22-38.png

The Extron panel on the podium desk controls the functionality in the room. To turn on the projector and access the sources, press the UCCS logo.

Turning the system on and off

The AV system will power on when pressing the UCCS logo on the welcome page of the touch panel. This will turn on the projector and route audio and video from the last selected source to the AV system.

To turn the AV system off, press the "Power Off" button on the top right corner of the touch panel.

Source Selection

To change sources, select the input you would like to send to the projector from the available buttons on the panel. You will know one is selected when the button back light is lit up. You may choose between Podium PC, Laptop, and Wireless Presentation. For the laptop input, you will need to connect the HDMI cable to the laptop, then switch to that input by pressing the respective button on the panel.

Volume Control

Volume can be controlled using the volume knob on the bottom of the touch panel. (As of now this function is not functional and still being worked on).

Using the Podium PC and Lectern

Academic Support Knowledge Base > EPC 239 - Computer Lab > EPC239 Podium PC.jpg

The computer located on the podium is the primary source for this AV system. This computer runs the same Windows image as our other podium PCs and can be signed into with your UCCS credentials.

Using a Laptop

Academic Support Knowledge Base > EPC 239 - Computer Lab > EPC Laptop Connection.jpg

The HDMI cable on the lectern is for use with a laptop. Connect your device, and the system will automatically switch to the correct input.

Using Wireless Presentation

Academic Support Knowledge Base > EPC 239 - Computer Lab > image-2026-1-23_8-29-32.png

To connect to Wireless Presentation, follow the link that is displayed on both the touch panel and the screen. It may prompt to download the Crestron Air Media app. All users must be connected to UCCS-Wireless to be able to share wirelessly.