Scope

This room is a standard Crestron room with the following equipment:

Podium PC on an Ergotron Mount
AirMedia
65" 4k Display and Wall Mount
DMPS-4k-350C for both 202 & 205
AV Rack for both 202 & 205
Touch panel
Network Switch

Location

Using the System

Turning the system on and off

The AV system will power on when pressing the start page on the touch panel. This will turn on the displays and switch the panel to the main menu page.

To turn the AV system off, press the red Power Off button in the upper right corner. You will have 10 seconds to cancel the power off, then the system will shut down.

Source Selection

To change sources, select the input you would like to send to the display. You may choose between Podium PC or AirMedia.

Volume Control

Volume can be controlled using the volume buttons at the bottom of any page on the touch panel. The raise and lower buttons are on either side of the volume bar and the mute button is located in the lower left corner.

Using the Podium PC and Lectern

The computer mounted on the wall is the primary source for this AV system. This computer runs the same image as all other podium computers in general fund classrooms and labs. You can sign in with your UCCS credentials.

Using the AirMedia

The AirMedia allows for wireless presentation of any device connected to the UCCS-Wireless network.

To connect to the AirMedia:

Select the AirMedia source on the touch panel
Open a web browser and enter the address listed on the touch panel or in the lower right corner of the screen
Follow the instructions on the webpage to download the app to your device
Enter the IP address and code to connect your device and start presenting