The Dell two monitor PC setup on the tables are not owned nor supported by OIT.


Scope

This is a standard Crestron room with the following equipment:

Location


Using the System

Turning the system on and off

The AV system will power on when pressing the start page on the touch panel.  This will turn on the projector, lower the screen, and switch the panel to the main menu page.

To turn the AV system off, press the red Power Off button in the upper right corner.  You will have 10 seconds to cancel the power off, then the system will shut down.

Source Selection


To change sources, select the input you would like to send to the display.  You may choose between Wall PC or AirMedia.

Volume Control

Volume can be controlled using the volume buttons at the bottom of any page on the touch panel.  The raise and lower buttons are on either side of the volume bar and the mute button is located in the lower left corner.

Projector/Screen Controls


The projector and screen will automatically power on and off/raise and lower with the system.

On the left side of the touch panel are options for A/V Mute, Freeze, and screen controls. 

Using the Podium PC 

The computer mounted on the wall is the primary source for this AV system.  This computer runs the same image as all other podium computers in general fund classrooms and labs.  You can sign in with your UCCS credentials.


Troubleshooting & Checklist

Audio Issues

Fixing Audio Issues: Standard Crestron Room

Video Issues

Fixing Video Issues: Standard Crestron Room

Room Specific Issues

This room has no unique equipment or known issues


Photos


View of room from entry door

View of projector screen and Epson L630U Projector














View of room from front left corner