HSMP 310 is located on the north side of 3rd floor.
The AV system will power on when pressing the start page on the touch panel. This will turn on the projector, lower the screen, and switch the panel to the main menu page.
To turn the AV system off, press the red Power Off button in the upper right corner. You will have 10 seconds to cancel the power off, then the system will shut down.
To change sources, select the input you would like to send to the projector. You may choose between Podium PC, Laptop, Doc Cam, Blu-ray Player, or AirMedia.
Volume can be controlled using the volume buttons at the bottom of any page on the touch panel. The raise and lower buttons are on either side of the volume bar and the mute button is located in the lower left corner.
The projector and screen will automatically power on and off/raise and lower with the system.
On the left side of the touch panel are options for A/V Mute, Freeze, and screen controls.
The computer mounted on the podium is the primary source for this AV system. This computer runs the same image as all other podium computers in general fund classrooms and labs. You can sign in with your UCCS credentials.
The lectern is height adjustable. To raise or lower the lectern, use the buttons located on the right corner of the desk.
The HDMI cable on the lectern is for use with a laptop. Connect your device and switch to the laptop input on the touch panel to project.
The AirMedia allows for wireless presentation of any device connected to the UCCS-Wireless network.
To connect to the AirMedia:
Selecting the Blu-ray source will open the Blu-ray control page. Use this page to turn on the player, open the disc drive, and navigate through the disc menus.
The Blu-ray player is located in the rack to the left of the lectern, just above the door.
There is a microphone input and output located in the rack to the left of the lectern. They are located at the top of the rack and are primarily for use with assistive listening systems.
The microphone input panel allows for two devices to be connected to the system, one for input and one for output. Both devices must use the XLR connections provided. Any microphone or audio input device connected to the input port will add audio to the system. This audio will be heard on the in-room speakers and the XLR output. The XLR output port will allow any connected device to receive all audio from a selected source and the XLR input.
Selecting the document camera source on the touch panel will route it to the projector. The document camera on the lectern is powered on by raising/folding it up.
On the top of the document camera are controls for zoom and auto focus.
HSMP 310 is a classroom/lab with 28 student workstations.
There are lectern height-adjustment controls below the desk surface on the right side of the lectern.
Manual screen controls and (future) wall phone are located on the wall behind the lectern.