Table of Contents
Laptop Cart Change
In Summer 2025, facilities led a project to convert this room into a departmentally controlled, laptop cart room. OIT will still support the AV in this space but the computer support for the laptop carts is being handled by LAS. Kacey Ross is the main point of contact. If Kacey is asking for assistance, please help to the best of your ability.
Features
This is a re-configurable classroom with one screen, HDMI and USB ingest for laptops and other BYOD setups.
- Audio system with speakers
- Pull down projection screen
- Full HD Laser projector
- Hyflex VTC System with Camera and Microphones
- HDMI 4x1 Auto Switcher
- HDMI Laptop Connections
- AirMedia Wireless Presentation
Location: Columbine 2nd Floor
Remotes
Projector Remote
This is the remote that controls the projector in the room. Located on front desk with Podium PC.
Hyflex Remote
Controls the Hyflex VTC System. Located on front desk with Podium PC.
Controlling the A/V System
Using the Remote
The remote for the projector controls most functions in the room. The remote is labeled below with the colors corresponding to a particular section explaining that function.
Turning the system on and off
To turn the system on, press the red "ON" button on the remote (outlined in orange above). This will only turn on the projector. You must physically pull on the string/handle on the screen to lower it.
To turn off the system, press the green "STANDBY" button twice (outlined in orange above). This will turn off the projector. To raise the screen, pull on the string/handle and the screen should raise. You may have to push on it a bit to get it all the way up.
Source Selection
The source should always be HDBaseT (outlined in blue above). The projector will automatically use the laptop HDMI connection if it is connected and default to the AirMedia device otherwise.
Volume Control
Volume can be controlled on the projector by pressing the volume button, then using the left and right arrows (outlined in red above). It may also be controlled on the PC using the volume controls 
on the bottom right corner of the screen.
Projector Control
The most commonly used projector functions are Blank (A/V Mute) and Freeze. Blank is on the bottom middle of the remote, and Freeze is on the bottom left of the remote (both outlined in green above).
- Blank will shutter the projector and mute the audio. Use this feature when you want to use the whiteboard or front of the room without shutting down the system. Please only use this feature for up to 20 minutes, otherwise it's best to shut down the system.
- Freeze will freeze the currently displayed image on the screen. Use this feature if you'd like to hold a frame still on the screen or use your laptop for another activity without displaying it, such as checking your email
Inputs
Using a Laptop
This room is equipped with an HDMI cable for a laptop. You can connect your laptop to this HDMI cable, and the projector will automatically switch sources to the connected laptop.
Using Wireless Presentation
You can also connect their laptop via a Crestron Air Media to wirelessly present. To change the source, disconnect any devices attached to the HDMI cable and the projector will automatically switch to the AirMedia source.
Using the Vaddio/Hyflex VTC System
For rooms with no podium PC, there is a USB cable that you will need to plug into to connect to the hyflex system.
Screen Control
The screen in this room is manually operated. The handle, with a string attached, is outlined in black in the photo below.
Mobile Laptop Cart
The room is supplied with a mobile laptop cart as displayed below:
Note: The laptops are managed by LAS and not by OIT. For any issues with the laptops, message LAS: Contact Us | College of Letters, Arts & Sciences
Troubleshooting
Audio Issues
Fixing Audio Issues: Uncontrolled Room - Academic Support Knowledge Base - University of Colorado Colorado SpringsVideo Issues
Vaddio/Hyflex VTC System
Photos
This is the room from the front right.
This is the room from the front left.
The room speakers are located in the ceiling on each corner of the classroom.
The room speakers are located in the ceiling on each corner of the classroom.
This is the screen located on the front wall behind the desk.
This is the projector in the room.
This is one of the four microphones in the room.